Suit Drive By Wire Applications
The Bosch Motorsport drive-by-wire (DBW) electronic throttle bodies are designed to control the fresh air delivery into the engine electronically replacing the mechanical linkage from the accelerator pedal. This DBW setup will require three things to make it work:
- An accelerator pedal module AF64-2137 (Sold Separately 0 280 755 051)
- A throttle valve that can be opened and closed by an electric motor (DBW)
- A powertrain or engine control module (PCM or ECM), either factory or aftermarket. The DBW will work with all applications with flex-fuels, CNG, and LPG if they are injected into the air stream after the throttle body. It is great for custom applications when a large throttle body is required with both 74mm (2-29/32”) and 82mm (3-7/32”) versions available to suit various engine capacities.
- Opening direction is counter clockwise
- Two redundant sensors control the throttle position
- DBW electronic throttle bodies have an idle air position
- Temperature Range: -40°C to 140°C (-40°F to 284°F)
- Can be connected directly to PCM/ECM units with ETC functionality
- Supply Voltage: 6 to 16 V
- Output signal I: 0 to 5 V for 0° to 90°
- Output signal II: 5 to 0 V for 0° to 90°
